Description
|
 |
The ultimate package for the everyday use!
- Run 50Lt compressor fridge for 3 - 4 days independently!
- Charge from any make / model / year vehicle via the DC charger
- Sophisticated vehicle charging - complete wiring loom included
- MPPT Solar regulator rated to 25 Amps
- 5 year warranty on DC box and Battery!
- 240 Volt charging
Thumper Battery Box:
- Built with the Projecta IDC25L DC battery charger
- Designed to suit all vehicles, including smart / variable alternators
- Compatible with older model vehicles
- Acts to increase low voltage from vehicle output to charge battery 100%
- Acts to isolate vehicle's main battery from secondary battery (Battery box)
- Equipped with an independent Anderson connector for vehicle charging
- Equipped with an independent Anderson connector for solar panel charging (regulated connection - up to 400-450watts of solar)
- Internally wired and protected with circuit breaker protection; one easy connection direct to the battery
- Equipped with multiple outlet sockets for running 12 Volt appliances
Features of DC Box:
1 x Projecta IDC25L lithium model 25Amp DC Battery charger (solar and vehicle compatible charge)
2 x Marine grade Cigarette type socket - rated to 16 Amps
Includes rubber cap design to protect all sockets
1 x Engel Fridge type socket (2 prong design) - rated to 16 Amps
1 x Dual USB socket - rated to 2.5Amp (min rating)
- used to illuminate the Volt meter gauge and activate the USB
2 x 50 Amp Anderson connectors - Labelled INPUT/OUTPUT
(one fitted to front of box and one on rear)
1 x 50 Amp Anderson connectors - designed purely for solar panel input - labelled "Unregulated solar input"
1 x 50 Amp Anderson connectors - designed purely for vehicle (alternator) input - labelled "Alternator input"
- All internal cabling to allow you to simply connect straight to the battery terminals
Internal Dimensions of Battery Box
Length - 330mm
Width - 183mm
Height - 220 mm (base only - lid allows for further height)
External Dimensions of Battery Box
Length - 410mm
Width - 260mm
Height - 280mm
* Dimensions includes all protruding outlet sockets *
240 Volt Battery Charging - L-10A
The Thumper Lithium 240 Volt LiFePO4 Battery charger has been designed especially with a 50 Amp Anderson connector.
This charger is solely designed for the use with LiFePO4 Lithium batteries. The charger has the ability to reactivate Lithium batteries that have shut down the BMS system with a low voltage disconnect and is entirely safe to leave connected to your Lithium battery.
Available in multiple sizes, this particular listing is for a 10 AMP model.
Specifications of Charger:
| Product code | L-10A |
| Rated capacity | 10 Amp |
| Input Voltage | AC100-240V 50-60Hz |
| Output voltage | 14.6 Volt |
| Chemistry | Lithium LiFePO4 cells |
| Connection | 50 Amp Anderson connector |
| Suits | Thumper Lithium 60 ~ 170 AH |
| Warranty | 12 months |
Vehicle Wiring Loom:
(for vehicle charge line) WITH 50 Amp Anderson fitted
1 x 50Amp Automatic reset circuit breaker
(for connection off main vehicle battery for the charge line)
1 x 50 Amp Anderson connector (Genuine)
Download ignition wiring loom instructions here
Thumper Lithium LiFePO4 Battery 100 AH
Features:
• Less than half the weight of a traditional lead acid battery
• Higher voltage maintained for longer run times with appliances
• Proven quality and reliability
• Compatible with chargers with an AGM or lithium setting
• For best results: Use of a lithium charger is recommended
• 5 year warranty
• Increased cycles compared to traditional lead acid
• Designed to be wired parallel
• Parallel connection is non-limited
• This battery is NOT designed for series linking
• This battery is NOT designed for starting purposes or under bonnet applications
• In built Bluetooth monitoring system!
*Please note that all upgrade options to BMS are modified after purchase and will incur 24 hours delay in dispatch time
Technical Specifications:
| Model No. | TL-100BT |
| Nominal Voltage | 12.8 V |
| Rated Capacity | 100 AH |
| Cell Type / Chemistry | Prismatic / LiFePO4 |
| Bluetooth |
Yes |
Dimensions and Weight:
| Length | 328 mm |
| Width | 172 mm |
| Height (Total) | 220 mm |
| Weight | 9.75 Kg |
Operating Temperature Range:
| BMS High temp cut out / Reconnect | 80˚C / 50˚C |
| Discharge | -20˚C ~ 60˚C |
| Charge | -20˚C ~ 45˚C |
| Storage | -5˚C ~ 35˚C |
Charging Methods:
| Recommended Charge Current | 10 ~ 50 Amps |
| Max Charge Current | 70 Amps |
Discharge:
| Max discharge current (continuous) | 100 Amps *upgrade available |
| Peak discharge current (1-3 seconds) | 300 Amps |
| BMS Current cut off | >100.5A 10s |
| BMS Current cut off | >120.0A 3s |
| BMS Current cut off | >150.0A 1s |
| BMS Voltage cut off / Reconnect | 10.0V / 12.0V |
| Self Discharge per month: | ≤3% |
| Warranty | 5 years from date of purchase | as of June 2023 |
Bluetooth APP:
The App offers the ability to monitor and control:
|
|
Bluetooth App | Home screen - explained:
Bluetooth App | Control Screen - Explained:
The Bluetooth app offers the ability to control the charge or discharge loads from the battery by remotely switching ON / OFF the power via the Bluetooth App.
Simply go into the CONTROL panel of your Bluetooth App and press:
CHARGE SWITCH - to remotely disconnect all charge loads from the battery. Turning this particular switch OFF will prevent the battery from taking a charge load from any charging source, including the DC battery charger.
DISCHARGE SWITCH - to remotely disconnect all discharge loads from the battery. Turning this particular switch OFF will prevent the battery from running any appliance as it disconnects all loads from the battery. This is the perfect option to use when storing the battery.
Features an ultra slim housing with a soft rubberised nonslip texture and shatterproof polycarbonate lens. SMD L.E.Ds provide a smooth and even light output whilst the top mounted L.E.Ds provide end tip illumination of objects in otherwise difficult to access areas. An in-built L.E.D indicator flashes red when the battery is low and blue when recharging.
5 hours of continuous illumination before recharging is required; Large rubber grip provides non-slip Docking station can be used to store and charge Probe II with 240V AC adaptorcomfort when handling; Micro USB lead allows the lamp to be charged from vehicles and computers; Lithium batteries have no memory effect and a longer shelf life;
Total package valued at $ 1,931.00
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.