This package includes the following components:
Predator Slimline batteries are packed with several features making them ideal for caravans, campers and 4WDs. They are especially useful for deep cycle applications with space restrictions.
The 70mm case design allows these batteries to be installed in locations with limited space like behind the rear seats of dual cab utility vehicles. The batteries are also suited for deep cycle applications where high cycle life and low weight is required.

Predator Slimline batteries deliver over 3500 cycles at 80% Depth of Discharge (DoD) as well as fast recharge capability. In comparison to lead acid batteries, LiFePO4 batteries have greater usable capacity which means you can enjoy long-lasting and consistent power with a fast recharge.
The powerful LiFePO4 chemistry behind the Predator Slimline series is well regarded for its safety profile. LiFePO4 batteries are incombustible and can operate over a wide temperature range. The integrated Battery Management System (BMS) ensures that Predator Slimline batteries are safe and stable.
Another useful feature is Bluetooth connectivity. Predator Slimline batteries allow users to connect to the Predator Bluetooth App to view real time information. Monitor vital information like the battery status, voltage, State of Charge, temperature and individual cell voltage to ensure the battery is ready for the journey ahead.
What is the 200 AH perfect for?
With a 200 AH capacity, this unit is the perfect option for running your compressor driven fridge or general 12 volt appliances! Connect with up to a 1800 watt Inverter to Induction cooktops or those other desirable 240 volt appliances when on the road!
The average 40-50Lt compressor type fridge will operate on the 200 AH for approx. 6-7 days independent of charging.
The 200 AH is equipped with an 150A internal Battery Management System (BMS). This is an ideal size to allow the user the ability to draw loads up to 1800 watts.
Don't need this much power? Why not check out the Predator 100 AH, which is equipped with a 80A BMS and will run loads up to 960 watts.
Specifications:
Nominal Capacity |
200 Ah |
Nominal Energy |
2560 Wh |
Nominal Voltage |
12.8V |
Charging Voltage |
14.4 ±0.2V |
Float Charge Voltage (for stand-by use) |
13.6V |
Maximum charge current |
150A |
Recommended charge current |
≤ 100A |
Maximum discharge current |
150A Constant |
Discharge cut-off voltage |
11.2V |
Cycle life |
3500 cycles at 80% DOD |
IP rating |
IP30 - internal installation only |
Dimensions (L x W x H), ±2mm |
600mm x 500mm x 70mm |
Nominal Weight |
27 kg |
Bluetooth Connectivity |
Yes, via App (search Predator Bluetooth) |
Operation Temperature Charge |
0oC to +50oC (0-95% RH) |
Discharge |
-20oC to +55oC (0-95% RH) |
Self-discharge Residual Capacity |
≤ 3% /month, ≤ 15% /year |
Recover Capacity |
≤ 1.5% /month, ≤ 8% /year |
Storage Environment ≤ 1 month |
-20oC to +60oC, 5% to 75% RH |
≤ 3 months |
-10oC to +45oC, 5% to 75% RH |
Recommended |
+15oC to +35oC, 5% to 75% RH |
Parallel connection |
Yes, up to 4 x batteries |
Series connection |
Yes, up to 4 x batteries (take caution) |
Combination of Parallel / series connection |
No |
Download specification brochure HERE
BCDCN1240
Redarc BCDC Core In-Cabin 40A DC Battery Charger is the next evolution of the legendary BCDC platform that has been powering off-grid adventures for over 10 years.
The Redarc BCDC Core In-Cabin 40A DC Battery Charger is the perfect DC to DC charging solution for in-cabin, canopy, or battery box setups where dust and weatherproofing isn’t required. Each BCDC Core features REDARC’s tried and tested dual input DC charging tech plus an MPPT solar regulator and Green Power Priority all in the familiar and compact BCDC form factor. These features allow the BCDC Core to efficiently charge from both the alternator and solar simultaneously, ensuring maximum charge capacity no matter the situation.
Looking for a DC-DC Charger for an under bonnet installation? The REDARC BCDC Classic range in
25amp,
40amp and
50amp models could be what you're looking for.
Max Charge Efficiency
The BCDC Core features a Maximum Power Point Tracking (MPPT) solar regulator and
'Green Power Priority'. With these features the BCDC Core will charge from both solar and the alternator simultaneously, maximising its charge rate and minimising the load on your alternator, saving fuel.
Compact & Silent
With no loud fans or relays and a small form factor, the BCDC Core can be tucked away, leaving room in the cabin for more important things. Don't ruin the look of your interior with bulky electronics. Hide it under the rear floor, behind a side panel or under the seats and make your power set up look like it was meant to be there.
Lithium Ready
With chemistry specific charging profiles, including
lithium the Redarc BCDC Core In-Cabin 40A DC Battery Charger ensures your batteries are ready for your next adventure. The award-winning technology in the BCDC Core has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.*
As a guide the BCDC Core 40A is typically used for lead acid battery banks over 200Ah and lithium batteries over 100Ah. Check the manufacturer’s data for your battery and ensure that the ‘Continuous Current Rating’ of the charger does not exceed the manufacturer’s recommended maximum charging current. For smaller batteries, REDARC recommends the BCDC Core 25A.
*Large capacity battery banks may require a few cycles to fully charge.
Backed by the Best
The Redarc BCDC Core In-Cabin 40A DC Battery Charger is designed, tested and manufactured in Australia and is backed by our leading technical support and national REDNetwork certified installer network.
If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.
Features
- Suitable for in-cabin and canopy installations only
- Compact form factor
- Simultaneous DC and solar charging with Green Power Priority
- Maximises the performance and life of your auxiliary battery
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries
- Suitable for use on vehicles with conventional alternator charging systems
Input Charge |
Simultaneous vehicle and solar |
Installation Type |
In-cabin only |
Input (Operating) Voltage |
9 - 32VDC |
Output System Voltage |
12VDC |
Maximum Charging Voltage |
15.3V |
Output Current Rating (Cont.) |
40A |
Input Fuse Rating |
60A |
Output Fuse Rating |
60A |
Type Approval |
E-Mark |
Warranty |
2 Years |
Standby Current Draw |
<8mA |
Output Power |
600W |
Width (mm) |
120 |
Height (mm) |
37 |
Length (mm) |
165 |
Weight (kg) |
0.9 |