Are you looking for a light weight portable battery option with
Digital Volt meter reading of input / output loads
BLUETOOTH connectivity to monitor battery condition
In built 300 watt Pure sine Inverter to run 240v appliances
Anderson connector for charging or discharging
Multiple 12 volt connections!
240 Volt Battery charging
Less than $ 1,000.00!
Look no further then this package!
We have coupled the 100 AH Thumper Lithium battery with the Projecta Battery Hub in order to offer a versatile option for a portable battery system!
With an in built 300 watt Inverter, this package will allow you the option to run appliances such as:
Sleep apnea machines
Charge laptops / phone chager
Run small TV or gaming devices
Run your compressor fridge
and more!
How can you monitor your battery condition?
This package includes a 100 AH Lithium battery. The battery is built with internal Bluetooth monitoring - monitor directly from your smart phone or smart device via a free downloadable app! The app will tell you exactly how much power you have remaining!
Not in to apps? No problem! The Projecta PowerHub has a digital Volt meter in built to allow you the option to monitor the state of charge direct from there!
Note: It is recommended to take the exact battery reading from the Bluetooth app. The display meter on the box should be used as a guide only when running lithium batteries.
How long can I run my fridge from this package?
40 - 50 Lt compressor fridge: approx 3 - 4 days
50 - 60 Lt compressor fridge: approx 2 - 3 days
Thumper Lithium 100 AH - Bluetooth
Thumper Lithium LiFePO4 batteries are fully sealed and are designed to be mounted on any angle for easy application.
Equipped with an internal battery management system (BMS), the Thumper Lithium offers safe charging and discharging with over temperature protection, under and over voltage cut off protection and also internal short circuit protection.
The LiFePO4 range of batteries are less than half the weight of a traditional AGM battery, whilst still offering all of the benefits of a heavy duty deep cycle.
These batteries are designed to hold the terminal voltage higher throughout each cycle, resulting in an increase depth of discharge and a longer overall run time with heavier draw appliances.
These batteries are quality! Check out the internal BMS on this battery compared to cheaper brands
Features:
• Less than half the weight of a traditional lead acid battery • Higher voltage maintained for longer run times with appliances • Proven quality and reliability • Compatible with chargers with an AGM or lithium setting • For best results: Use of a lithium charger is recommended • 5 year warranty • Increased cycles compared to traditional lead acid • Designed to be wired parallel • Parallel connection is non-limited • This battery is NOT designed for series linking • This battery is NOT designed for starting purposes or under bonnet applications • In built Bluetooth monitoring system!
Technical Specifications:
Model No.
TL-100BT
Nominal Voltage
12.8 V
Rated Capacity
100 AH
Cell Type / Chemistry
Prismatic / LiFePO4
Bluetooth
Yes
Dimensions and Weight:
Length
328 mm
Width
172 mm
Height (Total)
220 mm
Weight
11.2 Kg
Operating Temperature Range:
BMS High temp cut out / Reconnect
80˚C / 50˚C
Discharge
-20˚C ~ 60˚C
Charge
-20˚C ~ 45˚C
Storage
-5˚C ~ 35˚C
Charging Methods:
Recommended Charge Current
10 ~ 50 Amps
Max Charge Current
70 Amps
Discharge:
Max discharge current (continuous)
100 Amps
Peak discharge current (1-3 seconds)
300 Amps
BMS Current cut off
>100.5A 10s
BMS Current cut off
>120.0A 3s
BMS Current cut off
>150.0A 1s
BMS Voltage cut off / Reconnect
10.0V / 12.0V
Self Discharge per month:
≤3%
Warranty
5 years from date of purchase | as of June 2023
Bluetooth APP:
The App offers the ability to monitor and control:
AH capacity - Including remaining AH & AH consumed
Total cell balancing
High cell voltage
Low cell voltage
Cell voltage difference
Monitoring of dual battery sensors
Ability to parallel link and re-program AH capacity
Bluetooth App | Home screen - explained:
Bluetooth App | Control Screen - Explained:
The Bluetooth app offers the ability to control the charge or discharge loads from the battery by remotely switching ON / OFF the power via the Bluetooth App.
Simply go into the CONTROL panel of your Bluetooth App and press:
CHARGE SWITCH - to remotely disconnect all charge loads from the battery. Turning this particular switch OFF will prevent the battery from taking a charge load from any charging source, including the DC battery charger.
DISCHARGE SWITCH - to remotely disconnect all discharge loads from the battery. Turning this particular switch OFF will prevent the battery from running any appliance as it disconnects all loads from the battery. This is the perfect option to use when storing the battery.
Lithium battery - Q+A's
What type of Lithium battery is the Thumper?
The Thumper is a Lithium LiFePO4 Prismatic battery.
Is the Thumper Lithium a Deep cycle?
Yes! The Thumper Lithium is designed to be continually charged and discharged fr the purposes of running all accessories, such as fridges, lighting, inverters and more.
What size Inverter can I run from the 100 AH / 120 AH Lithium?
Both the Thumper Lithium 100 AH & 120 AH have a continual discharge rate of 100Amps (1200watts). The batteries also have a MAX peak discharge of 300 Amps for 1-3 seconds (surge capacity).
This means that if you are using only one battery, then the maximum Inverter size that would successfully run on the Thumper 100 AH / 120 AH would be a 1200watt.
What would happen if I run over the 100 Amps discharge rating?
The Thumper Lithium is protected internally with a BMS (Battery Management System), meaning that it will protect the battery against overcharge / low voltage and excessive discharge drain.
Example: If you connect a 2000 watt Inverter (166Amp total draw) to the Thumper Lithium battery, then the battery would allow you to run UP TO 1200watts (100Amps) from the Inverter. If the draw exceeded this 100 Amps, then the BMS inside the battery would disconnect and cease providing power to your system.
Once the load has been disconnected from the battery, the BMS will reconnect itself within a few seconds and the battery will be ready to use again.
Can I mount the Lithium battery on its side?
Yes! The Lithium battery is completely sealed and is designed to allow you to mount on any side.
Do I need Lithium charger (240 Volt / DC charger)?
As with any Lithium battery, it is recommended (when possible) to use a lithium battery charger. Lithium Battery charger chargers charge the battery at a slightly higher voltage and run through compatible charging stages to suit the Lithium's chemistry. Charging your battery with a Lithium compatible charger will help to prolong the life of your Lithium battery by ensuring it is receiving a full rate of charge.
In stating the above, the Thumper Lithium range of batteries are designed to be able to charge from an AGM battery setting.
Can I use my portable solar panel on the Thumper Lithium Battery?
The Thumper Lithium is designed to charge from any system that is compatible to charge from either a Lithium or AGM setting.
Providing your solar regulator is designed to suit Lithium or AGM chemistry, then it would be perfectly suitable to charge from your portable solar panel.
The Thumper Lithium Battery will not charge from an unregulated panel as the internal BMS will disconnect any input charge that exceeds 15 Volts.
What is the life expectancy of the Thumper Lithium battery?
The Thumper Lithium is rated over cycles. A cycle is the process of charging and discharging the battery. The Thumper Lithium is rated to a minimum of 2000 cycles.
Can I wire the Thumper Lithium in Parallel?
Yes! Both the Thumper 100 AH & 120 AH are designed to be wired in parallel and are non-limited. This means you can build your 12 volt system as large as you desire with use of these batteries!
Can I link a Thumper Lithium 100 AH to a 120 AH ?
No. As the BSM is different in both the 100 AH and the 120 AH, it means the two batteries are not designed to be linked to one another.
Can I wire the Thumper Lithium in Series?
Wiring in series converts a 12 Volt battery into either a 24Volt / 36Volt or 48Volt system (depending on how it is wired)
The Thumper 100 AH is designed to run in series from 12-48V max 4 in series, no limit in parallel.
Can the Thumper Lithium Battery be used for starting purposes?
No.
What voltage is fully charged in a Lithium Battery?
Approx 13.2 ~ 13.4 Volts is 100% charged in a Lithium battery.
The Thumper Lithium 100 AH now comes includes a in built BLUETOOTH monitoring device. Simply download the free Bluetooth app to accurately monitor the state of charge in a Lithium battery set up.
What voltage is FLAT in the Thumper Lithium Battery
Using voltage to monitor the state of charge in a lithium battery is unfortunately not accurate.
As the voltage in a lithium battery remains higher throughout the cycle life of the battery, it means that Thumper Lithium will read in the 12's when it is nearing the end of it's capacity. When the remaining capacity of the battery has been exhausted, the battery's BMS will disconnect and the battery will shut down.
Can I use a normal Volt meter to monitor my Lithium Battery set up?
The short answer to this is Yes, and No.
A voltage meter will provide you an 'indication' on the state of charge on a lithium battery. However, the slightest change in the digital reading of voltage can mean over 50% of your battery's capacity.
The most accurate method to monitor a lithium battery is by the use of the free bluetooth app available in your App store.
What does the 12.8V on the front of the battery represent? Much the same as how a lead acid battery is configured, The Thumper lithium battery is constructed using a multiple of smaller cells linked internally.
The Thumper Lithium is built using a string of 4 x 3.2Volt cells, linked in series, to make up the 12.8Volt.
What is the warranty of the Thumper Lithium battery? Now with 5 year warranty from date of original purchase | as of June 2023
Projecta Power Hub
Power-Hub turns your battery into a versatile user friendly option for powering and charging a wide range of accessories and appliances while you are off the grid.
It is the ideal alternative to a conventional dual battery system, giving you the freedom to take power away from your vehicle.
Features:
Digital display screen
2 x Cigarette sockets
2 x Merit sockets
2 x USB Sockets
1 x Engel fridge outlet
50 Amp Anderson connector
In built PURE SINE 300 watt Inverter
This is the perfect camping unit to allow you the versatility to run:
Laptops
Phone chargers
Recharge Camera Batteries
Recharge docking stations
Run Sleep app machine
Fridges
Lighting
All other 12 volt appliances
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
Home of 12 volt does not offer refunds for 'simple change of mind'
Returns must be made within 7 days of purchase when looking for a refund
Returns for refund: items must be in brand new condition and in original packaging where possible
Home of 12 Volt reserve the right to determine if a product has been misused or neglected and therefore refuse a refund under these terms
Home of 12 volt is not responsible for any freights cost or damages that may be incurred with relation to return items
Home of 12 Volt will repair or replace the item if faulty and the unit will be returned to you as the customer at the expense of Home of 12 Volt. (Return postage for customer to Home of 12 Volt is borne by the customer).
If refunds are approved, they will be processed via the same method as the original payment (and processed via the website portal)
We suggest to contact our team on 08 8391 3121 to first discuss any return items prior to sending