FEATURES
Rapid Recharge Technology (RRT)
The Lithium Iron Phosphate (LiFePO4) battery can rapidly recover charge from the vehicle’s alternator following a successful jumpstart. Leaving the clamps connected to the vehicle’s battery for 40 seconds will recharge the Jump starter to 100% of the original charge status.
Once the Jump starter is fully charged, the RRT will shut off avoiding overcharging.
So safe and easy to use, it’s child’s play.
The Lithium Iron Phosphate (LiFePO4) batteries are purpose-built for jumpstarting and specifically designed for cranking, making them much safer than the Lithium Cobalt (LiCoO2) batteries found in many other jump starters.
As well as being the safest, they’re also incredibly easy to use, alerting you of an incorrect connection and indicating how much charge remains.
LiFePO4 lasts 4x longer than other Jump Starters.
These little units pack a punch.
Unlike other jump starters, Projecta Intelli-Start Jump starters are built using a Lithium Iron Phosphate (LiFePO4) battery designed specifically for jump starting. The lightweight, high-cranking battery delivers more power to the premium ergo-designed clamps.
LiFePO4 batteries provide more starts with up to 2000 battery cycles – that’s around four times more than our competitors,* resulting in a much longer operating life.
Powerbank USB charging & an L.E.D light.
The Emergency IS920 and IS1220 models feature a 2.1A USB port for charging mobile devices with the Intelli-Start jump starter acting as a powerful powerbank for your devices while you’re on the road or going off-grid.
They also come with a bright built-in L.E.D light, making them the perfect companion when you need to see what you’re doing under the hood late at night.
Jump Start Performance
The IS1220 is suitable for starting most 12V petrol vehicles up to 7.0 litres and 4.5L diesel. A fully charged IS1220 can do 68 Petrol and 34 Diesel starts (with a flat vehicle battery). With 40 seconds of Rapid Recharge after each jumpstart, the IS1220 will not need to be recharged during the working day.
*Compared to Lithium Cobalt technology. IS1220 produces up to 1800 cycles.
| SPECIFICATIONS |
|
PART NO
|
IS1220
|
|
APPLICATION
|
Emergency
|
|
OUTPUT
|
12V
|
|
EMERGENCY JUMPSTARTS
(With a flat vehicle battery)
|
68 (Petrol) 34 (Diesel)
|
|
SUITABLE FOR VEHICLES
|
Up to 7.0L petrol and up to 4.5L diesel
|
|
VEHICLE VOLTAGE RANGE
|
0 – 15.0V
|
|
USB OUTPUT
|
|
|
USB OUTPUT
|
2.1A, 5.0V
|
|
USB LOW VOLTAGE DISCONNECT
|
Battery voltage at 10.5
|
|
BATTERY
|
|
|
BATTERY CAPACITY
|
12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V
|
|
BATTERY CHEMISTRY
|
Lithium Iron Phosphate (LiFePO4)
|
|
THEORETICAL SHORT CIRUIT CURRENT
|
1200A
|
|
CLAMP OUTPUT
|
400A
|
|
TOTAL BATTERY CYCLES
|
1800
|
|
JUMP STARTER LEADS
|
|
|
LENGTH
|
Positive 31.0cm, negative 27.0cm
|
|
CABLE
|
8mm² 8(AWG)
|
|
POLARITY PROTECTION
|
MCU controlled with Electronic Switch Smart Module
|
|
RECHARGING
|
|
|
CABLE
|
1m long USB to Micro USB
|
|
MICRO USB CHARGING PORT
|
2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied)
|
|
12V DC CHARGING
|
12V to 5V 2.1Amp USB charger (provided)
|
|
RECHARGE TIME
|
8 hours
|
|
JUMP STARTER
|
|
|
WEIGHT
|
0.80 kg
|
|
DIMENSIONS
|
H: 50mm L: 197mm W: 95mm
|
|
OPERATING TEMPERATURE
|
-20°C to 60°C
|
|
STORAGE TEMPERATURE
|
-0°C to 45°C
|
|
INGRESS PROTECTION
|
IP53 (rain proof) with covers over the ports
|
Australia